263 lines
8.9 KiB
Python
263 lines
8.9 KiB
Python
# Imports
|
|
from machine import I2C
|
|
|
|
|
|
# Register pointers
|
|
REG_CONFIG = const(1)
|
|
REG_TEMP_BOUNDARY_UPPER = const(2)
|
|
REG_TEMP_BOUNDARY_LOWER = const(3)
|
|
REG_TEMP_BOUNDARY_CRITICAL = const(4)
|
|
REG_TEMP = const(5)
|
|
REG_MANUFACTURER_ID = const(6)
|
|
REG_DEVIDE_ID = const(7)
|
|
REG_RESOLUTION = const(8)
|
|
|
|
|
|
# Sensor resolution values
|
|
TEMP_RESOLUTION_MIN = const(0) # +0.5 C, refresh rate 30 ms
|
|
TEMP_RESOLUTION_LOW = const(1) # +0.25 C, refresh rate 65 ms
|
|
TEMP_RESOLUTION_AVG = const(2) # +0.125 C, refresh rate 130 ms
|
|
TEMP_RESOLUTION_MAX = const(3) # +0.0625 C, refresh rate 250 ms [Default]
|
|
|
|
|
|
# Alert selectors
|
|
ALERT_SELECT_ALL = const(0) # ambient > upper || ambient > critical || ambient < lower [Default]
|
|
ALERT_SELECT_CRIT = const(1) # Ambient temp > critical
|
|
|
|
|
|
# Alert polarity
|
|
ALERT_POLARITY_ALOW = const(0) # Active-low, requires pull-up [Default]
|
|
ALERT_POLARITY_AHIGH = const(1) # Active-high
|
|
|
|
|
|
# Alert output mode
|
|
ALERT_OUTPUT_COMPARATOR = const(0)
|
|
ALERT_OUTPUT_INTERRUPT = const(1)
|
|
|
|
class MCP9808(object):
|
|
"""
|
|
This class implements an interface to the MCP9808 temprature sensor from
|
|
Microchip.
|
|
"""
|
|
|
|
def __init__(self, i2c=None, addr=0x18):
|
|
"""
|
|
Initialize a sensor object on the given I2C bus and accessed by the
|
|
given address.
|
|
"""
|
|
if i2c == None or i2c.__class__ != I2C:
|
|
raise ValueError('I2C object needed as argument!')
|
|
self._i2c = i2c
|
|
self._addr = addr
|
|
self._check_device()
|
|
|
|
def _send(self, buf):
|
|
"""
|
|
Sends the given bufer object over I2C to the sensor.
|
|
"""
|
|
if not isinstance(buf, bytearray):
|
|
buf = bytearray([buf])
|
|
|
|
if hasattr(self._i2c, "writeto"):
|
|
# Micropython
|
|
self._i2c.writeto(self._addr, buf)
|
|
elif hasattr(self._i2c, "send"):
|
|
# PyBoard Micropython
|
|
self._i2c.send(self._addr, buf)
|
|
else:
|
|
raise Exception("Invalid I2C object. Unknown Micropython/platform?")
|
|
|
|
def _recv(self, n):
|
|
"""
|
|
Read bytes from the sensor using I2C. The byte count must be specified
|
|
as an argument.
|
|
Returns a bytearray containing the result.
|
|
"""
|
|
if hasattr(self._i2c, "writeto"):
|
|
# Micropython (PyCom)
|
|
return self._i2c.readfrom(self._addr, n)
|
|
elif hasattr(self._i2c, "send"):
|
|
# PyBoard Micropython
|
|
return self._i2c.recv(n, self._addr)
|
|
else:
|
|
raise Exception("Invalid I2C object. Unknown Micropython/platform?")
|
|
|
|
def _check_device(self):
|
|
"""
|
|
Tries to identify the manufacturer and device identifiers.
|
|
"""
|
|
self._send(REG_MANUFACTURER_ID)
|
|
self._m_id = self._recv(2)
|
|
if not self._m_id == b'\x00T':
|
|
raise Exception("Invalid manufacturer ID: '%s'!" % self._m_id)
|
|
self._send(REG_DEVIDE_ID)
|
|
self._d_id = self._recv(2)
|
|
if not self._d_id == b'\x04\x00':
|
|
raise Exception("Invalid device or revision ID: '%s'!" % self._d_id)
|
|
|
|
def set_shutdown_mode(self, shdn=True):
|
|
"""
|
|
Set sensor into shutdown mode to draw less than 1 uA and disable
|
|
continous temperature conversion.
|
|
"""
|
|
if shdn.__class__ != bool:
|
|
raise ValueError('Boolean argument needed to set shutdown mode!')
|
|
self._send(REG_CONFIG)
|
|
cfg = self._recv(2)
|
|
b = bytearray()
|
|
b.append(REG_CONFIG)
|
|
if shdn:
|
|
b.append(cfg[0] | 1)
|
|
else:
|
|
b.append(cfg[0] & ~1)
|
|
b.append(cfg[1])
|
|
self._send(b)
|
|
|
|
def set_alert_mode(self, enable_alert=True, output_mode=ALERT_OUTPUT_INTERRUPT, polarity=ALERT_POLARITY_ALOW, selector=ALERT_SELECT_ALL):
|
|
"""
|
|
Set sensor into alert mode with the provided output,
|
|
polarity and selector parameters
|
|
|
|
If output mode is set to interrupt, a call to acknowledge_alert_irq()
|
|
is required to deassert the MCP9808
|
|
"""
|
|
if enable_alert.__class__ != bool:
|
|
raise ValueError('Boolean argument needed to set alert mode!')
|
|
if output_mode not in [ALERT_OUTPUT_COMPARATOR, ALERT_OUTPUT_INTERRUPT]:
|
|
raise ValueError("Invalid output mode set.")
|
|
if selector not in [ALERT_SELECT_ALL, ALERT_SELECT_CRIT]:
|
|
raise ValueError("Invalid alert selector set.")
|
|
if polarity not in [ALERT_POLARITY_ALOW, ALERT_POLARITY_AHIGH]:
|
|
raise ValueError("Invalid alert polarity set.")
|
|
|
|
enable_alert = 1 if enable_alert else 0
|
|
self._send(REG_CONFIG)
|
|
cfg = self._recv(2)
|
|
|
|
alert_bits = (output_mode | (polarity << 1) | (selector << 2) | (enable_alert << 3)) & 0xF
|
|
lsb_data = (cfg[1] & 0xF0) | alert_bits
|
|
|
|
b = bytearray()
|
|
b.append(REG_CONFIG)
|
|
b.append(cfg[0])
|
|
b.append(lsb_data)
|
|
self._send(b)
|
|
|
|
def acknowledge_alert_irq(self):
|
|
"""
|
|
Must be called if MCP9808 is operating in interrupt output mode
|
|
"""
|
|
self._send(REG_CONFIG)
|
|
cfg = self._recv(2)
|
|
b = bytearray()
|
|
b.append(REG_CONFIG)
|
|
b.append(cfg[0]) # MSB data
|
|
b.append(cfg[1] | 0x20) # LSB data with interrupt clear bit set
|
|
self._send(b)
|
|
|
|
def set_alert_boundary_temp(self, boundary_register, value):
|
|
"""
|
|
Sets the alert boundary for the requested boundary register
|
|
"""
|
|
if boundary_register not in [REG_TEMP_BOUNDARY_LOWER, REG_TEMP_BOUNDARY_UPPER, REG_TEMP_BOUNDARY_CRITICAL]:
|
|
raise ValueError("Given alert boundary register is not valid!")
|
|
if value < -128 or value > 127: # 8 bit two's complement
|
|
raise ValueError("Temperature out of range [-128, 127]")
|
|
|
|
integral = int(value)
|
|
frac = abs(value - integral)
|
|
if integral < 0:
|
|
integral = (1 << 9) + integral
|
|
integral = ((integral & 0x1FF) << 4)
|
|
frac = (((1 if frac * 2 >= 1 else 0) << 1) + (1 if (frac * 2 - int(frac * 2)) * 2 >= 1 else 0)) << 2
|
|
twos_value = (integral + frac if value >= 0 else integral - frac) & 0x1ffc
|
|
b = bytearray()
|
|
b.append(boundary_register)
|
|
b.append((twos_value & 0xFF00) >> 8)
|
|
b.append(twos_value & 0xFF)
|
|
self._send(b)
|
|
|
|
|
|
def set_resolution(self, r):
|
|
"""
|
|
Sets the temperature resolution.
|
|
"""
|
|
if r not in [TEMP_RESOLUTION_MIN, TEMP_RESOLUTION_LOW, TEMP_RESOLUTION_AVG, TEMP_RESOLUTION_MAX]:
|
|
raise ValueError('Invalid temperature resolution requested!')
|
|
b = bytearray()
|
|
b.append(REG_RESOLUTION)
|
|
b.append(r)
|
|
self._send(b)
|
|
|
|
def get_temp(self):
|
|
"""
|
|
Read temperature in degree celsius and return float value.
|
|
"""
|
|
self._send(REG_TEMP)
|
|
raw = self._recv(2)
|
|
u = (raw[0] & 0x0f) << 4
|
|
l = raw[1] / 16
|
|
if raw[0] & 0x10 == 0x10:
|
|
temp = (u + l) - 256
|
|
else:
|
|
temp = u + l
|
|
return temp
|
|
|
|
def get_temp_int(self):
|
|
"""
|
|
Read a temperature in degree celsius and return a tuple of two parts.
|
|
The first part is the decimal part and the second the fractional part
|
|
of the value.
|
|
This method does avoid floating point arithmetic completely to support
|
|
platforms missing float support.
|
|
"""
|
|
self._send(REG_TEMP)
|
|
raw = self._recv(2)
|
|
u = (raw[0] & 0xf) << 4
|
|
l = raw[1] >> 4
|
|
if raw[0] & 0x10 == 0x10:
|
|
temp = (u + l) - 256
|
|
frac = -((raw[1] & 0x0f) * 100 >> 4)
|
|
else:
|
|
temp = u + l
|
|
frac = (raw[1] & 0x0f) * 100 >> 4
|
|
return temp, frac
|
|
|
|
def _debug_config(self, cfg=None):
|
|
"""
|
|
Prints the first 9 bits of the config register mapped to human
|
|
readable descriptions
|
|
"""
|
|
if not cfg:
|
|
self._send(REG_CONFIG)
|
|
cfg = self._recv(2)
|
|
|
|
# meanings[a][b] with a the bit index (LSB order),
|
|
# b=0 the config description and b={bit value}+1 the value description
|
|
meanings = [
|
|
["Alert output mode", "Comparator", "Interrupt"],
|
|
["Alert polarity", "Active-low", "Active-high"],
|
|
["Alert Selector", "All", "Only Critical"],
|
|
["Alert enabled", "False", "True"],
|
|
["Alert status", "Not asserted", "Asserted as set by mode"],
|
|
["Interrupt clear bit", "0", "1"],
|
|
["Window [low, high] locked", "Unlocked", "Locked"],
|
|
["Critical locked", "Unlocked", "Locked"],
|
|
["Shutdown", "False", "True"]
|
|
]
|
|
|
|
print("Raw config: {}".format(str(cfg)))
|
|
for i in range(0, min(len(meanings), len(cfg)*8)):
|
|
part = 0 if i > 7 else 1
|
|
value = 1 if (cfg[part] & (2**(i % 8))) > 0 else 0
|
|
print(meanings[i][0] + ": " + meanings[i][1 + value])
|
|
|
|
|
|
class SimulatedMCP9808():
|
|
|
|
def __init__(self, temperature):
|
|
self.temperature = temperature
|
|
|
|
def get_temp(self):
|
|
return self.temperature
|